Outstanding Advantages

1．CREE XM-L2 LED, delivering a maximum output of 900 ANSI lumens.
2．Patented Tail-cap & Side Switch design, allowing easy access to power settings.
3．Easy-access Strobe feature can activated at any time
4．Ergonomically designed for one-handed operation.
5．Specifically designed tail cap allows upright 'Candle' hands-free use.
6．Waterproof design rated to IPX-8 (waterproof to a depth of 2 meters).
7．Stainless Steel bezel design protects the lens and reflector system from drops and impacts.
8．Intelligent control circuits balance brightness, run-time and heat emission for improved performance.
9．Optical lens system allows for illumination up to 100 meters.
10．Anti-shortcut design prevents accidental damage to internal electronics.

Specification

1. CREE XM-L2 LED with a lifespan of up to 50,000 hours
2. Lighting modes: High/Medium/Low/Moonlight/Strobe/SOS/Momentary
3. Working Voltage: 3.0V-8.4V
4. Battery: 1x 18650 battery
5. Body color: Gun Metal Grey
6. Reflector: Smooth reflector
7. Lens: Toughened ultra-clear glass
8. Dimensions: 141mm (Length) x 36mm (Head) x 25.4mm (Body)
9. Net weight: 146g (Excluding battery)

Note: All specification data was achieved using 18650/2200mAh/4.2V batteries. Variations of ±5% are normal. The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments.

Outstanding Advantages

1. Max output: 245 Lumens
2. Max run time: 18 hours
3. Cree XP-G R5 LED
4. Two output modes and easy operation
5. Forward tactical switch with momentary activation
6. Clip for hands-free operation
7. Waterproof to IPX-8 Standard
8. Smooth beam - perfect balance of beam throw and spill
9. Military Grade HA Type III anodizing
10. Highly efficient digitally regulated output - maintains constant brightness
11. Reverse polarity protection

Specification

1. Emitter: Cree XP-G R5 LED with a lifespan of 50,000 hours
2. TTwo output modes: ----Max output: 245 AISI Lumens/ 1hr ----Low output: 20 Lumens/ 18 hrs.
3. Working Voltage: 1.8V - 3.2V
4. Battery: 1pc CR123A
5. Switch:
a) Tactical tail switch for power on/ off and momentary activation.
b) Rotate the flashlight head to adjust the brightness output - tighten head for max output, loosen for low output
6. Lens: Toughened ultra-clear glass.
7. Material: Aircraft grade aluminum with Military Grade HA Type III anodizing.
8. Reflector: Textured reflector for smooth beam.
9. Dimensions: 89mm (Length) x 23mm (Head) x 22.6mm (Body)
10. Net weight: 54g (Excluding battery).
11. Waterproof to IPX-8 Standard.
12. Included accessories: lanyard, body clip, two spare o-rings, and a rubber switch boot.

Specification

1. Emitter: CREE XP-G R5 LED with a lifespan of up to 50,000 hours
2. Four outputs: 26 lumens (5.7 hours) —— 3 lumens (66 hours) —— 85 lumens (70 minutes) —— Strobe 85 lumens (2.3 hrs)
3. Battery: 1 x AAA (Alkaline, Ni-MH). 10440 use is not recommended
4. Switch: Twist switch. Switch modes by loosening and tightening the flashlight head
5. Lens: Toughened ultra-clear glass
6. Reflector: Textured orange peel reflector
7. Body Material: Stainless Steel
8. Dimensions: 71.6mm (Length) x 12.7mm (Head) X11.6mm (Body)
9. Net weight: 18g (Excluding battery)
10. Waterproof to IPX-8 standard (2 meters)

Outstanding Advantages

1. One of the smallest and brightest AAA flashlights in the world
2. Digitally regulated output, with no PWM (high speed flickering that is present in most regulated lights)
3. Highly efficient at converting energy into light
4. Max output: 85 ANSI Lumens on high.
5. Max run time: 66 hours on low
6. Reverse polarity protection protects flashlight and battery from damage

Outstanding Advantages

1. Rechargeable battery pack. 4*18650 batteries with capacity of 7.2V/4400mAH, which power the light for up to 4 hours on maximum illumination (1200 lumens) and up to 10 hours on medium (370 lumens).
2. The unit is multipurpose, without any changes to the head of the XT20, allows the XT20 head to be attached to the Klarus XT20 body tube to be utilized as a flashlight for exploration, hunting, camping and travel.
3. Three lighting modes and one strobe mode; the strobe mode alerts oncoming traffic in a congested area.
4. Durable in all weather conditions; silica gel protects the remote pressure switch from the outdoor elements and is shockproof & waterproof. The remote pressure switch is easily attached to the most bicycle handle bar applications, which makes the perfect hand-operated function, no need to take your hands off the handle bar.
5. Durable, thick core, minimal resistance wire makes for the BK20 to have minimal loss of power between light and power source.
6. The unit is easily detachable and has an anti-shut off power setting to ensure a reliable connection and is also water and mud proof.
7. Waterproof and shock proof silica gel battery holster.
8. Detachable stainless steel light head holder is simple, practical and completely portable.
9. Easily detachable battery charging holder and high performance charger with indicator to ensure for fast charging
10. Uses high cushioning, easily washed waterproof battery holster, which efficiently protects the batteries and avoids abrasion of the batteries and bike because of rough terrain riding

Specification

※ Working voltage: 7.0V - 14.0V

※ Power supply cord: Black, ï¿ 4cm×100cm

※ Remote switch cord: Black, ï¿ 4cm×20cm（Natural），￠4cm×46cm（Stretchable）

※ Three lighting button and one function button. Three lighting modes and one strobe mode.

------Lighting mode:

High mode: 1200 lumens (4 hours)

Medium mode: 370 lumens (10 hours)

Low mode: 10 lumens (360 hours)

------Strobe mode: 1200 lumens (7.6 hours)

※ Battery pack: 4*18650 batteries,7.2V/4400mAh

※ Material: Aluminum 6061-T6, silica gel, PU slingshot thread

※ Aerospace-grade aluminum. Hard-anodized anti-abrasive finish

※ Waterproof to IPX-8 Standard (underwater to 2 meters)

utstanding Advantages

1. Dual button tail switch for quick, one-hand operation. No need to fiddle with switches in two different places
2. Mode switch provides good tactile feedback and is very easy to locate in the dark
3. Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
4. Forward tactical main switch with momentary activation
5. Maintains constant brightness with super high efficiency
6. Max output: 470 ANSI Lumens on high
7. Max run time: 300 hours (12.5 days) on low
8. Reverse polarity protection protects flashlight and battery from damage

Specification

1. CREE XM-L (T6) LED with a lifespan of up to 50,000 hours
2. Three lighting modes and 1 flashing mode: ----Lighting modes: 470 ANSI lumens (2.3hrs) --- 150 lumens (7.3 hrs)--- 10 lumens (300hrs) ----Variable frequency strobe: 470 lumens (4.6 hrs)
3. Working Voltage: 3V-10V
4. Battery: 2 x CR123A / 1 x 18650 / 2 x 16340
5. Body color: Military grey
6. Reflector: Textured orange peel reflector
7. Switch:
a) Tactical main switch for turning the light on and off. Momentary activation from off.
b) Dedicated mode switch for instant access to strobe and changing modes
8. Lens: Toughened ultra-clear glass
9. Material：Aircraft grade aluminum
10. Dimensions: 143mm (Length) x 34.9 mm (Head) x 25.4 (Body)
11. Net weight: 118g (Excluding battery)
12. Waterproof to IPX-8 Standard (underwater to 2 meters)

Outstanding Advantages

1. Uses a Cree XM-L2 LED, which delivers a maximum output of 820 ANSI lumens
2. Elegant stainless steel head pressure ring design protects the lens and reflector system from drops and impacts
3. Easy to access Strobe function - instant access to strobe from any mode
4. Dual button tail switches for quick, one-hand operation. No need to fiddle with switches in two different places
5. Forward tactical main switch with momentary activation
6. Detachable head accessory design allows accessories such as colored filters to be securely attached to the XT11
7. IPX-8 Standard (waterproof to a depth of 2 meters)

Specification

1. CREE XM-L2 LED with a lifespan of up to 50,000 hours
2. 3 lighting modes and 1 flashing mode
3. Working Voltage: 3.5V-8.4V
4. Battery: 2x CR123A / 1x 18650 (Do not use 16340 batteries or any other battery over than 3.0V)
5. Body color: Military grey
6. Reflector: Textured orange peel reflector
7. Dimensions: 149mm (Length) x 35mm (Head) x 25.4mm (Body)
8. Net weight: 132g (Excluding battery)
9. Material: Aircraft grade aluminum
10. Waterproof to IPX-8 Standard (underwater to 2 meters)
11. Lens: Toughened ultra-clear glass
12. Included accessories: holster, lanyard, body clip, tactical ring and two spare o-rings

Note: All specification data was achieved using 18650/3100mAh/4.2V batteries. Variations of ±5% are normal. The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments.

Features
• Two flashlight heads, each containing a powerful CREE XM-L L2 (U2) LED to produce a wide,
intense beam with good throw ability
• Impressive maximum output of 1550 lumens
• Dual-button tail switch, for quick one hand operation. No need to fiddle with switches in two different
places and the buttons are easy to locate in the dark
• Strobe can be activated with the mode button when the flashlight is on or off, giving instant access to
strobe from any mode. This makes the XT20 extremely effective for self-defense and CQB
• Flat side head for wear comfortable
• Forward tactical main switch with momentary activation
• Max runtime of 93 hrs
• Reverse polarity protection protects flashlight and battery from damage

Specification
• Two CREE XM-L L2 (U2) LEDs, each with a lifespan of up to 50,000 hours.※ Three lighting modes and one flashing mode
• Working voltage: 7.0V - 14.0V
• Battery: 2x 18650/ 4x CR123A
• Body color: Military grey
• Reflector: A Textured orange peel reflector, a Smooth peel reflector
• Entire length: 218.8 mm
• Head dimensions: 68.8mm (length) x 67.3mm (width) x 33.5mm (height)
• Body dimensions: 170mm (length) x 28mm (diameter)
• Net weight: 250g (excluding battery)
• Material: Aerospace-grade aluminum. Hard-anodized anti-abrasive finish
• Waterproof to IPX-8 Standard (underwater to 2 meters)
• Lens: Toughened ultra-clear, durable glass
• Anti-roll and anti-slip body design
• Accessories: Heavy duty holster, removable metal tactical ring, two spare O-rings and spare rubber boot
Note
The above-mentioned parameter is only an approximation. Two 18650, 3100 mAh lithium-ion batteries
were used in our tests. Results may vary with different batteries and environments

Specifications:
1. Cree XM-L T6 LED with a lifespan of up to 50,000 hours
2. Three lighting modes and 1 flashing mode:
a) Lighting modes: 470 ANSI lumens (2.5 hrs)
b) 150 lumens (7.3 hrs)
c) 10 lumens (295 hrs)
d) Variable frequency strobe: 470 lumens (5 hrs)
3. Working Voltage: 3.4-8.4V
4. Battery: 2x CR123, 1x 18650, 2x 16340
5. Body color: Military grey
6. Reflector: Textured orange peel reflector
7. Switch: Dual button tail switch
8. Tactical main switch for turning the light on and off. Momentary activation from off.
9. Dedicated mode switch for instant access to strobe and changing modes
10. Lens: Toughened ultra-clear glass
11. Material：Aircraft grade aluminum
12. Dimensions: 132mm (Length) x 26.4mm (Head) x 25mm (Body)
13. Net weight: 68g (Excluding battery)
14. Waterproof to IPX-8 Standard (underwater to 2 meters)
15. Included accessories: holster, lanyard, spare rubber switch boot and spare o-rings.

Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments; Data was achieved using 1X 18650 2600 maH SANYO Lithium-ion battery.

Outstanding Advantages

1. CREE XM-L2 LED, delivering a maximum output of 1080 ANSI lumens:
2. Patented Tail-cap & Side Switch design, allowing easy access to power settings:
3. Waterproof design rated to IPX-8 (waterproof to a depth of 2 meters):
4. Tripod mountable via the standard UNC1/4'-20 threaded mounting point:
5. Stainless Steel bezel design protects the lens and reflector system from drops and impacts:
6. Rotatable lanyard design:
7. Intelligent control circuits balance brightness, run-time and heat emission for improved performance:
8. Easy-access Strobe feature can activated at any time

Specification

1. CREE XM-L2 LED, delivering a maximum output of 1080 ANSI lumens:

2. Patented Tail-cap & Side Switch design, allowing easy access to power settings:

3. Waterproof design rated to IPX-8 (waterproof to a depth of 2 meters):
4. Tripod mountable via the standard UNC1/4'-20 threaded mounting point:
5. Stainless Steel bezel design protects the lens and reflector system from drops and impacts:
6. Rotatable lanyard design:
7. Intelligent control circuits balance brightness, run-time and heat emission for improved performance:
8. Easy-access Strobe feature can activated at any time:

Outstanding Advantages:

1. CREE XM-L2 LED, delivering a maximum output of 820 ANSI lumens
2. Patented Tail-cap & Side Switch design, allowing easy access to power settings
3. Waterproof design rated to IPX-8 (waterproof to a depth of 2 meters)
4. Stainless Steel bezel design protects the lens and reflector system from drops and impacts
5. Rotatable lanyard design
6. Dual clip site design meets different demand
7. Intelligent control circuits balance brightness, run-time and heat emission for improved performance
8. Easy-access Strobe feature can activated at any time

Specification:

1. CREE XM-L2 LED with a lifespan of up to 50,000 hours
2. Lighting modes: High/Medium/Low/Moonlight/Strobe/SOS/Momentary
3. Working Voltage: 3.0V-8.4V
4. Battery: 18650*1/CR123A*2(do not use 16340 battery or any other battery over than 3.0V)
5. Body color: Gun Metal Grey
6. Reflector: Smooth reflector
7. Lens: Toughened ultra-clear glass
8. Dimensions: 133mm (Length) x 28mm (Head) x 22.4mm (Body)
9. Net weight: 79g (Excluding battery)

Note: All specification data was achieved using 18650/2200mAh/4.2V batteries. Variations of ±5% are normal. The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments.

Operation
A -Tail Power Switch:
• While OFF: Lightly depress switch to activate momentary-ON
• While OFF: Fully depress switch fully for constant-ON
• While ON: Fully depress switch for OFF.
Other functions please reference to B, C.

B - Side Switch
• While OFF: Short press (< 1 seconds) to activate momentary-ON
• While OFF: Long press (> 1 seconds) to activate constant-ON
• While ON: Long press (> 1 seconds) to change MODE.(High/Med/Low/Moonlight)
• While ON: Short press (< 1 seconds) for STANDBY.
• From ANY mode: Fast double-press to activate STROBE. Press the switch again to turn STROBE off.
• From STROBE mode: Long press (> 1 seconds) for SOS.
C- Memory function:
When a lighting mode is on for more than 3 seconds, the mode will be memorized. The device will return to this mode when turned on next.

Off/Standby function:
The Tail Power Switch will completely power-down the torch when turned OFF, preventing accidental activation of the side switch whilst the torch is in storage or being carried in a pouch.

If the torch is in STANDBY mode, press the Tail Power Switch ONCE to completely turn the torch OFF and ONCE more to turn it ON (if required).

The Side Switch STANDBY function will turn the torch OFF but allow quick activation again from the side switch. This is designed to allow a quick ON/OFF capability while using the torch regularly over a short period of time. To use the side switch, the Tail Power Switch MUST be turned ON.

Outstanding Advantages

• Super bright LED Spotlight, with a output of up to 3450 lumens and Max runtime of 18 days
• 3 CREE XM-L2(U2) LEDs situated in deep smooth reflectors throws beam to a maximum distance
of 800 meters
• Lightweight, easy to carry, billet aluminum casing rated to IPX-8 Standard (waterproof to a depth
of 2 meters). DC rechargingsocket safe to use in wet conditions
• Innovative one-piece design limits thermal stress on internal electronics, allowingfor extended
periods of use, even atmaximum output
• Tripod mountable via the standard UNC1/4'-20 threaded mounting point
• High/Low output dual switch buttons for quick, one-hand operation
• Easy to replace battery pack - meet the continuous use requirements of Search & Rescueand
Emergency Services work
• Easy to access Strobe function - instant access to strobe from any mode
• Nine modes with memory function
• Ideal for Military, Law Enforcement, Hunting, Search & Rescue and Outdoor activities

Specification

• Uses x3 Cree XM-L2(U2) LEDs with a lifespan of 50,000 hours each
• Lighting modes:
Max: 3450 lumens (1.1hrs)
Low: 9 lumens (430hrs)
Strobe: 3450 lumens (2.2hrs)
SOS: 3450 lumens (4.2hrs)
50% brightness when light turned on
• Reflector: Smooth reflector
• Lens: Tough ultra-clear tempering glass, with anti-reflective coating
• Dimensions: 155.5*52*144.2mm
• Weight: 900g (including battery pack)
• Included accessories:
x1 Shoulder belt
x2 Screw-in attachment rings
x1 Charger (8.4V/3A)
x1 O-ring replacement (65*2mm)
• Charger: AC/DC LI-ION CHARGER
• Input: AC 110V-240V 50/60HZ
• Output: DC 8.4V/3A

Features
• Brand new ergonomic design allows easy operation with just one hand;
• Brand new switch design with an enlarged and recessed main switch making it easy to find and hard to activate accidentally;
• Brand New custom KLARUS 2600mAh 3.7V rechargeable Li-ion battery, using Samsung cells and a unique contact design that automatically aligns positive/negative current regardless of battery orientation;
• Upgraded CREE XM-L2-U2 LED, now delivering a maximum output of 930 ANSI lumens;
• Tripod mountable via the standard UNC1/4′ -20 threaded mounting point;
• Specially designed magnetic charging port. When the charging cable is within 1cm of the charging port it self-locates to make the connection. The charging cable can be removed quickly and safely at any time, which makes it an effective flashlight to use in rapid response situations;
• Uses a USB interface chargeable design, so you can charge in the home, office, airport, vehicle, etc. Basically, anywhere that has a USB interface;
• Low loss, high intensity, portable USB charging cable;
• Strobe can be activated when the flashlight is on or off, giving instant access to a blinding strobe from any mode;
• Three lighting modes with memory function make it adaptable for different situations;
• Detachable stainless steel strike bezel protects the lens and has a self-defense purpose;
• Color filters and a diffuser can be securely attached; screwed-in to replace the bezel;
• Waterproof to IPX-8 Standard (underwater to 2 meters);

Specification
• CREE XM-L2 U2 LED with a lifespan of up to 50,000 hours;
• Four lighting modes: High/Medium/Low/Strobe;
• Working Voltage: 3.0V - 8.4V;
• Battery compatibility: 2x CR123A / 1x 18650 (any 18650 battery with PCB protection)Warning: Only use the supplied KLARUS custom 18650 battery when charging the light directly (using the magnetic charging cable). All other batteries must be taken out to recharge;
• Charging: Input: 5 V; Output 4.2V/500 mA Max;
• Charging time: 7 hours;
• Body color: Military grey;
• Reflector: Textured orange peel reflector;
• Lens: Toughened ultra-clear glass;
• Dimensions: 160mm (Length) x 35mm (Head) x 25.4mm (Body);
• Net weight: 160g (Excluding battery);
• Included accessories: 18650 battery, holster, lanyard, body clip, USB charging cable and two spare o-rings;
Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments;
Lumen data and runtime was achieved using KLARUS 2600mAh 18650 batteries;

Outstanding Advantages

• Specially designed deep parabolic reflector produces a perfect beam profile and super long throw ability. Intended applications include
Military, Law Enforcement, Hunting, Exploration, Security, Search & Rescue, etc
• Uses a Cree XM-L2 (U2) LED, which delivers a maximum output of 950 ANSI lumens
• Max run time:65 hours
• Beam throw ability: 453 meters
• New circuit design delivers both high lumen output and long runtime
• Dual button tail switch for quick, one-hand operation. No need to fiddle with switches in two different places
• Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
• Detachable stainless steel strike bezel
• Reverse polarity protection protects flashlight and battery from damage
• Maintains constant brightness with super high efficiency
• Can be used with ED10 remote switch and fits

Specification
• CREE XM-L2 (U2) LED with a lifespan of up to 50,000 hours
• Three lighting modes and 1 flashing mode:
• Working Voltage: 7V - 14V
• Battery: 4x CR123A / 2x 18650 (use of 16340 batteries is not recommended)
• Body color: Military grey
• Reflector: Deep parabolic reflector
• Tactical main switch for turning the light on and off. Momentary activation from off
• Dedicated mode switch for instant access to strobe and changing modes
• Lens: Toughened ultra-clear glass
• Material: Aircraft grade aluminum 6061-T6
• Dimensions: 248mm (Length) x 58mm (Head) x 25.4mm (Body)
• Net weight: 280g (Excluding battery)
• Waterproof to IPX-8 Standard (underwater to 2 meters)
• Included accessories: Holster, lanyard, metal tactical ring and two spare o-rings
Note:

The above-mentioned parameters are approximate and may vary betwee flashlights, batteries and environments.

Data was achieved using SANYO 18650 3100 mAh lithium ion batteries

The new XT series flashlights from Klarus are serious, precision-engineered illumination tools, which have been developed with tactical use and self-defense in mind. Part of the XT (Extreme Tactical) range, which includes the popular XT10 and XT20, this new XT2A is a true Tactical EDC, which uses 2x AA batteries. Being a handy size, it is easy to clip to a pocket or carry in a bag.

Despite being an AA battery light, the XT2A is very bright – outputting a maximum 245 ANSI lumens with 2x AA batteries. It uses Klarus's innovative dual-button tail switch (as seen on the XT10 and XT20 models) to allow for fast mode changes (from High to Medium and Low) and provide lightning-quick access to a super bright and disorientating strobe – making the XT2A an amazing self-defense flashlight.

Feature
1.Dual button tail switch for quick, one-hand operation
2.Main switch is easy to find in the dark and will be pressed by default when pressing the tail of the light
3.Mode switch is at a lower level than the main switch and provides good tactile feedback
4.Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
5.Forward tactical main switch with momentary activation
6.Maintains constant brightness with very high efficiency
7.Max output: 245 ANSI Lumens on high
8.Max run time: 130 hours
9.Reverse polarity protection protects flashlight and battery from damage when a battery is inserted incorrectly

Specification
1.CREE XP-G R5 LED with a lifespan of up to 50,000 hours
2.Three lighting modes and 1 flashing mode:
a)Lighting modes: 245 ANSI lumens (1.5hrs)
b)60 lumens (8 hrs)
c)4 lumens (130hrs)
d)Variable frequency strobe: 245 lumens (3hrs)
3.Working Voltage: 1.8-3.2V
4.Battery: 2pcs 1.5V AA Alkaline or Ni-MH (not included). 14500 lithium-ion batteries will destroy the light
5.Body color: Military grey
6.Reflector: Textured orange peel reflector
7.Switch: Dual tail switch
8.Tactical main switch for turning the light on and off. Momentary activation from off
9.Dedicated mode switch for instant access to strobe and changing modes
10.Lens: Toughened ultra-clear glass
11.Material：Aircraft grade aluminum
12.Dimensions: 163mm (Length) x24mm (Head) x22.6 (Body)
13.Net weight: 75g (Excluding battery)
14.Waterproof to IPX-8 Standard (underwater to 2 meters)
15.Included accessories: holster, lanyard, and two spare o-rings

Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments; Data was achieved using SANYO ENELOOP AA Alkaline batteries.

The new XT series flashlights from Klarus are serious, precision-engineered illumination tools, which have been developed with tactical use and self-defense in mind. Part of the XT (Extreme Tactical) range, which includes the popular XT10 and XT20, this new XT1A is a true Tactical EDC. Being smaller than the XT10, it is easy to carry in a pocket or bag.

Despite being small, the XT1A is very bright – outputting a maximum 150 ANSI lumens with a single AA battery. It uses Klarus's innovative dual-button tail switch (as seen on the XT10 and XT20 models) to allow for fast mode changes (from High to Medium and Low) and provide lightning-quick access to a super bright and disorientating strobe – making the XT1A an amazing self-defense flashlight.

Feature
1.Dual button tail switch for quick, one-hand operation
2.Main switch is easy to find in the dark and will be pressed by default when pressing the tail of the light
3.Mode switch is at a lower level than the main switch and provides good tactile feedback
4.Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
5.Forward tactical main switch with momentary activation
6.Maintains constant brightness with very high efficiency
7.Max output: 150 ANSI Lumens on high
8.Max run time: 50 hours
9.Reverse polarity protection protects flashlight and battery from damage when a battery is inserted incorrectly

Specification
1.CREE XP-G R5 LED with a lifespan of up to 50,000 hours
2.Three lighting modes and 1 flashing mode:
a)Lighting modes: 150 ANSI lumens (1hrs)
b)30 lumens (6 hrs)
c)4 lumens (50hrs)
d)Variable frequency strobe: 150 lumens (2hrs)
3.Working Voltage: 0.9V-1.8V
4.Battery: 1pcs 1.5V AA Alkaline or Ni-MH (not included). 14500 lithium-ion battery will destroy the light
5.Body color: Military grey
6.Reflector: Textured orange peel reflector
7.Switch: Dual tail switch
8.Tactical main switch for turning the light on and off. Momentary activation from off.
9.Dedicated mode switch for instant access to strobe and changing modes
10.Lens: Toughened ultra-clear glass
11.Material：Aircraft grade aluminum
12.Dimensions: 116mm (Length) x24mm (Head) x22.6 (Body)
13.Net weight: 53g (Excluding battery)
14.Waterproof to IPX-8 Standard (underwater to 2 meters)
15.Included accessories: holster, lanyard, and two spare o-rings

Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments; Data was achieved using SANYO ENELOOP AA Alkaline battery

The new XT series flashlights from Klarus are serious, precision-engineered illumination tools, which have been developed with tactical use and self-defense in mind. Part of the XT (Extreme Tactical) range, which includes the popular XT10 and XT20, this new XT1C is a true Tactical EDC. Being smaller than the XT10, it is easy to carry in a pocket or bag.

Despite being small, the XT1C is very bright – outputting a maximum 245 ANSI lumens with a single CR123 battery. It uses Klarus's innovative dual-button tail switch (as seen on the XT10 and XT20 models) to allow for fast mode changes (from High to Medium and Low) and provide lightning-quick access to a super bright and disorientating strobe – making the XT1C an amazing self-defense flashlight.

Feature
1.Dual button tail switch for quick, one-hand operation
2.Main switch is easy to find in the dark and will be pressed by default when pressing the tail of the light
3.Mode switch is at a lower level than the main switch and provides good tactile feedback
4.Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
5.Forward tactical main switch with momentary activation
6.Maintains constant brightness with very high efficiency
7.Max output: 245 ANSI Lumens on high
8.Max run time: 70 hours
9.Reverse polarity protection protects flashlight and battery from damage when a battery is inserted incorrectly

Specification
1.CREE XP-G R5 LED with a lifespan of up to 50,000 hours
2.Three lighting modes and 1 flashing mode:
a)Lighting modes: 245 ANSI lumens (1hrs)
b)60 lumens (4 hrs)
c)4 lumens (70hrs)
d)Variable frequency strobe: 245 lumens (2hrs)
3.Working Voltage: 1.8-3.2V
4.Battery: 1XCR123
5.Body color: Military grey
6.Reflector: Textured orange peel reflector
7.Switch: Dual button tail switch
8.Tactical main switch for turning the light on and off. Momentary activation from off
9.Dedicated mode switch for instant access to strobe and changing modes
10.Lens: Toughened ultra-clear glass
11.Material：Aircraft grade aluminum
12.Dimensions: 99mm (Length) x24mm (Head) x22.6 (Body)
13.Net weight: 47g (Excluding battery)
14.Waterproof to IPX-8 Standard (underwater to 2 meters)
15.Included accessories: holster, lanyard, and two spare o-rings

Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments; Data was achieved using DURACELL CR123A battery

Outstanding Advantages

One of the smallest and brightest AAA flashlights in the world
· Digitally regulated output, with no PWM
(high speed flickering that is present in most regulated lights)
· Highly efficient at converting energy into light
Max output: 85 ANSI Lumens on high. Max run time: 66 hours on low
· Titanium body for corrosion resistance and a solid feel
· Reverse polarity protection protects flashlight and battery from damage

Specification

Emitter: CREE XP-G R5 LED with a lifespan of up to 50,000 hours
· Four outputs:
—— 26 lumens (5.7 hours)
—— 3 lumens (66 hours)
—— 85 lumens (70 minutes)
—— Strobe 85 lumens (2.3 hrs)
· Battery: 1 x AAA (Alkaline, Ni-MH). 10440 use is not recommended.
· Switch: Twist switch. Switch modes by loosening and tightening the flashlight head
· Lens: Toughened ultra-clear glass
· Reflector: Textured orange peel reflector
· Body Material: Titanium body
· Dimensions: 71.6mm (Length) x 12.7mm (Head) X11.6mm (Body)
· Net weight: 12g (Excluding battery)
· Waterproof to IPX-8 standard (2 meters)

Features
※ One of the smallest and brightest AAA flashlights in the world
※ Digitally regulated output, with no PWM
(high speed flickering that is present in most regulated lights)
※ Highly efficient at converting energy into light
Max output: 85 ANSI Lumens on high. Max run time: 66 hours on low
※ Stainless Steel body for corrosion resistance and a solid feel
※ Reverse polarity protection protects flashlight and battery from damage

Specification
※ Emitter: CREE XP-G R5 LED with a lifespan of up to 50,000 hours
※ Four outputs: 26 lumens (5.7 hours) —— 3 lumens (66 hours) ——
85 lumens (70 minutes) —— Strobe 85 lumens (2.3 hrs)
※ Battery: 1 x AAA (Alkaline, Ni-MH). 10440 is not recommended.
※ Switch: Twist switch. Switch modes by loosening and tightening the
flashlight head
※ Lens: Toughened ultra-clear glass
※ Reflector: Textured orange peel reflector
※ Body Material: Aluminium 6061 T6
※ Dimensions: 71.6mm (Length) x 12.7mm (Head) X11.6mm (Body)
※ Net weight: 10g (Excluding battery)
※ Waterproof to IPX-8 standard (under water 2 meters)

Outstanding Advantages

1. Max output: 245 Lumens
2. Max run time: 33 hours
3. Cree XP-G R5 LED
4. Two output modes and easy operation
5. Forward tactical switch with momentary activation
6. Clip for hands-free operation
7. Waterproof to IPX-8 Standard
8. Smooth beam - perfect balance of beam throw and spill
9. Military Grade HA Type III anodizing
10. Highly efficient digitally regulated output - maintains constant brightness
11. Reverse polarity protection

Specification

1. Emitter: Cree XP-G R5 LED with a lifespan of 50,000 hours
2. TTwo output modes: ----Max output: 245 Lumens/ 1hr ----Low output: 20 Lumens/ 33 hrs.
3. Working Voltage: 1.8V - 3.2V
4. Battery: 2pcs 1.5V AA (Alkaline, Ni-MH).
5. Switch:
a) Tactical tail switch for power on/ off and momentary activation.
b) Rotate the flashlight head to adjust the brightness output - tighten head for max output, loosen for low output
6. Lens: Toughened ultra-clear glass.
7. Material: Aircraft grade aluminum with Military Grade HA Type III anodizing.
8. Reflector: Textured reflector for smooth beam.
9. Dimensions: 155mm (Length) x 23mm (Head) x 22.6mm (Body).
10. Net weight: 73g (Excluding battery).
11. Waterproof to IPX-8 Standard.

Features:

1. Max output: 150 Lumens
2. Max run time: 28 hours
3. Cree XP-G R5 LED
4. Two output modes and easy operation
5. Forward tactical switch with momentary activation
6. Clip for hands-free operation
7. Waterproof to IPX-8 Standard
8. Smooth beam - perfect balance of beam throw and spill
9. Military Grade HA Type III anodizing
10. Highly efficient digitally regulated output - maintains constant brightness
11. Reverse polarity protection

Specification:

1. Emitter: Cree XP-G R5 LED with a lifespan of 50,000 hours
2. TTwo output modes: ----Max output: 150 Lumens/ 1.5 hrs ----Low output: 11 Lumens/ 28 hrs
3. Working Voltage: 0.9V - 1.8V
4. Battery: 1pc 1.5V AA (Alkaline, Ni-MH)
5. Switch:
a) Tactical tail switch for power on/ off and momentary activation.
b) Rotate the flashlight head to adjust the brightness output - tighten head for max output, loosen for low output
6. Lens: Toughened ultra-clear glass.
7. Material: Aircraft grade aluminum with Military Grade HA Type III anodizing.
8. Reflector: Textured reflector for smooth beam.
9. Dimensions: 105mm (Length) x 23mm (Head) x 22.6mm (Body).
10. Net weight: 57g (Excluding battery).
11. Waterproof to IPX-8 Standard.
12. Included accessories: lanyard, body clip, two spare o-rings, and a rubber switch boot.

Note: please tell me your favorite color, otherwise we will random delivery.

Specification

1. Nichia white GS LED with a lifespan of 100,000 hours
2. Lighting: 13 ANSI lumens (20 hrs)
3. Battery: (1)1.5V AAA (Ni-MH, Alkaline) battery
4. Color: Red finish, blue finish
5. Dimensions: 70.3mm (length) X14.5mm (Body)
6. Net weight: 14g (Excluding battery)
7. Included accessory: 8MM Steel Ring, o-ring

Note: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments.

Outstanding Advantages

1. Nichia white light GS LED with a lifespan of 100,000 hours
2. 13 ANSI lumens, great for night use
3. Uses one 1.5V AAA (Ni-MH, Alkaline) battery
4. Constant current circuit design- maintains constant brightness
5. Reliable twist switch for quick, one-handed operation
6. Capable of standing up securely on flat surfaces to serve as a candle
7. Made of durable aircraft-grade aluminum
8. Body is military standard Type III with hard-anodized finish
9. IPX-8 Water resistance
10.Optimal for Every Day Carry